fox electronics 5570 enterprise parkway fort myers, florida 33905 usa +1.239.693.0099 fax +1.239.693.1554 www.foxonline.com emea tel: +44 .1283.568153 | canada +1.888.438.2369 | asia hong kong tel: +852.2854.4285 | japan tel: +81.3.3374.2079 ? 2011 fox electronics | iso9001:2008 certified hcmos 3.2x2.5mm 3.3v smd oscillator rev. 8/24/2011 rohs compliant / pb free http://www.foxonline.com/need_a_sample.htm model: f337/f339 series page 1 of 2 output (pin 3) active active high z ? enable / disable function inh (pin 1) open 2 '1' level v ih 70% v dd '0' level v il 30% v dd features ? 3.3v operation ? hcmos output ? standby function ? tape and reel (2,000 pcs. std) frequency stability 1 15ppm 15ppm 10ppm 10ppm operating temperature (oc) -20 ~ +70 -40 ~ +85 -20 ~ +70 -40 ~ +85 frequency range (mhz) 4.000 ~ 54.000 4.000 ~ 54.000 4.000 ~ 54.000 4.000 ~ 54.000 f337f f337r f339f f339r model number part number 826b-frequency-xxxxx 826c-frequency-xxxxx 826-frequency-xxxxx 826a-frequency-xxxxx ? part number selection learn more - internet required 4.000 ~ 54.000 mhz -40oc ~ +85oc 3.3v 5% 7ma 45% ~ 55% 5ns 5ns 10% v dd 90% v dd min 4ma min -4ma min 15pf 10a 10ms 250ns 10ms -145dbc/hz typ. 3ps rms typ. 260oc / 10 seconds 1 au parameters frequency range (f o ) storage temperature range (t stg ) supply voltage (v dd ) input current (i dd ) output symmetry (50% v dd ) rise time (10% ~ 90% v dd ) fall time (90% ~ 10% v dd ) output voltage (v ol ) (v oh ) output current (i ol ) (i oh ) output load (hcmos) standby current (i std ) start-up time (t s ) output disable time 2 output enable time 2 phase noise (@ 10khz offset) period jitter reflow soldering temp / time moisture sensitivity level (msl) termination finish ? electrical characteristics max (unless otherwise noted) 1 inclusive of 25 o c tolerance, operating temperature range, input voltage change, load change, reflow and one year aging. 2 an internal pullup resistor from pin 1 to pin 4 allows active output if pin 1 is left open. note: a 0.01f bypass capacitor should be placed between v dd (pin 4) and gnd (pin 2) to minimize power supply line noise. drawing is for reference to critical specifications defined by size measurements. certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may vary. all specifications subject to change without notice. pin connection #1 e/d** #3 output #2 gnd #4 v dd 3.3 max 1.0 max solder pad layout recommended 2.6 max 0.7 0.5 1.3 #1 #4 #3 #2 top view bottom view dot denotes pin 1 all dimensions are in millimeters. 1.6 #1 tp #2 #4 tp #3 #1 tp = test point and is no connect 1.0 1.6 0.8 1.3 marking
31 fox electronics 5570 enterprise parkway fort myers, florida 33905 usa +1.239.693.0099 fax +1.239.693.1554 www.foxonline.com emea tel: +44 .1283.568153 | canada +1.888.438.2369 | asia hong kong tel: +852.2854.4285 | japan tel: +81.3.3374.2079 ? 2011 fox electronics | iso9001:2008 certified hcmos 3.2x2.5mm 3.3v smd oscillator rev. 8/24/2011 rohs compliant / pb free http://www.foxonline.com/need_a_sample.htm model: f337/f339 series hcmos 3.2x2.5mm 3.3v smd oscillator rev. 8/24/2011 rohs compliant / pb free http://www.foxonline.com/need_a_sample.htm model: f337/f339 series page 2 of 2 ? tape specifications (millimeters) model f337/f339 a ?1.5 b 4.0 c 4.0 d 3.5 e 8.0 f 1.4 std reel qty 2,000 ? reel specifications (millimeters) g 2.5 h ?13 i ?22 j ?60.2 k ?178 l 8.0 m 1.6 model f337/f339
|